Minimum Order Requirement: $100 | Free Domestic Shipping on orders of $250 or more.
The Pi Tape P2SPSSID inside diameter tape measures the inside diameter of bores, pipe, housings and rings from 12″ to 36″ directly. Its scale is graduated in units of π, so it reads the diameter rather than the circumference, and a vernier gives the fine reading.
| Model · Type | P2SPSSID · Inside diameter (I.D.) |
| Measuring range | 12″ to 36″ |
| Reading · Accuracy | Inch, vernier to 0.001″ · ±0.001″ |
| Material | 716 stainless steel. For corrosive, wet, washdown, marine and food environments. |
| Tape width · thickness | 1/4″ (6.35 mm) gage, 1/2″ (12.7 mm) body · 0.010″ (0.25 mm) |
| Calibration | Calibration report traceable through NIST to SI units, from Pi Tape’s ISO/IEC 17025 accredited lab |
| Made by | Pi Tape Texas, LLC, Tyler, Texas, USA |
Using it: clean the tape and the part, set the tape square inside the bore, read the main scale at the vernier zero, then add the vernier line that lines up exactly. Pi Tape’s instruction sheet comes with the tape.
All Pi Tape models and ranges → · Pi Tape guide on jealco.com →
Minimum Order Requirement: $100 | Free Domestic Shipping on orders of $250 or more.
